Specifications

2-632
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show ip wccp
show ip wccp
To display the Web Cache Communication Protocol (WCCP) global configuration and statistics, use the
show ip wccp command in user EXEC or privileged EXEC mode .
show ip wccp [service-number [view | detail] | interf ac es [cef | counts | detail ] | web-cache]
Syntax Description
Command Modes User EXEC (>)
Privileged EXEC (#)
Usage Guidelines Use the clear ip wccp command to reset the counter for the “Packets Redirected” information.
Use the show ip wccp service-number command to get the “Total Packets S/W Redirected” count. The
“Total Packets S/W Redirected” count i s the number of packets redir ected in software .
Use the show ip wccp service-number detail command to get the “Packets Redirected” count. The
“Packets Redirected” count i s the number of packets redir ected in software.
Use the show ip wccp web-cache detail command to get an indication of which traffic is redirected to
which cache e ngine.
Use the show ip wccp command to show the configured WCCP services and a summary of their current
state.
For cache-engine clusters using Cisco cache engines, the reverse proxy service-number is indicated by
a value of 99.
All the packet statistics corr espond to packets switche d in software.
Examples This secti on contains examples and field descriptions for the following forms of this command:
• show ip wccp service-number
• show ip wccp service-number view
service-number (Optional) Identification number of the web cache service group being controlled
by the cache. The number can be from 0 to 254. For web caches using Cisco cache
engines, the reverse proxy service is indicated by a value of 99.
interfaces (Optional) WCCP redirect interfaces.
cef (Optional) CEF interface statistics, including the number of input, output, dynamic,
static, and multicast services.
counts (Optional) WCCP interface count statistics, including the number of CEF and
process-switched output and i nput packets redirecte d.
detail (Optional) WCCP interface configuration statistics, including the number of input,
output, dynamic, static, and m ulticast services.
web-ca che (Optional) Statistics for the web cache service.
view (Optional) Other m embers of a particular servic e group, have or have not been
detected.
detail (Optional) Information about the router and all web caches.