Specifications

2-550
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show diagnostic result module test 3
show diagnostic result modul e test 3
To display the results from the ongoi ng packet memory test, use th e show diagnostic result module
test 3 command. The output indicates whether the test passed, fail ed, or was not run.
show diagnostic result module N test 3 [de tai l]
Syntax Description
Defaults N on-detailed results.
Command Modes EXEC mode
Usage Guidelines The detail keyword is intended for use by Cisco suppor t personnel when analyz ing failures.
Examples This exampl e shows how to display the resul ts from the ongoing pack et memory tests:
Switch# show diagnostic result module 1 test 3
Test results: (. = Pass, F = Fail, U = Untested)
3) packet-memory-ongoing -----------> .
This example shows how to display the detailed results from the ongoing packet memory tests:
Switch# show diagnostic result module 1 test 3 detail
Test results: (. = Pass, F = Fail, U = Untested)
___________________________________________________________________________
3) packet-memory-ongoing -----------> .
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 0
Last test execution time ----> n/a
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> n/a
Total failure count ---------> 0
Consecutive failure count ---> 0
packet buffers on free list: 64557 bad: 0 used for ongoing tests: 979
Packet memory errors: 0 0
Current alert level: green
Per 5 seconds in the last minute:
0 0 0 0 0 0 0 0 0 0
0 0
N M odule n umber.
detail (Optional) Specifies the display of detailed information for analysis.