Specifications

2-542
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show diagnostic result module
show diagnostic result modul e
To display the module-based diagnostic test results, use the show diagnostic result module command.
show diagnostic result module [slot-num | all] [test [test-id | test-id-range | all]] [ detail]
Syntax Description
Defaults A summary of the test results for all modules in the chassis is displayed.
Command Modes Privileged EXE C mode
Examples This example shows how to display the summary results for all modules in the chassis:
Switch# show diagnostic result module
Current bootup diagnostic level: minimal
module 1:
Overall diagnostic result: PASS
Diagnostic level at card bootup: bypass
Test results: (. = Pass, F = Fail, U = Untested)
1) supervisor-bootup -----------------------> U
2) packet-memory-bootup --------------------> U
3) packet-memory-ongoing -------------------> U
module 4:
Overall diagnostic result: PASS
Diagnostic level at card bootup: minimal
Test results: (. = Pass, F = Fail, U = Untested)
1) linecard-online-diag --------------------> .
module 5:
Overall diagnostic result: PASS
Diagnostic level at card bootup: minimal
slot-num (Optional) Specifies the slot on which diagnostics are displayed.
all (Optional) Displays the diagnostics for all slots.
test (Optional) Displays selected tests on the spec ified module.
test-id (Optional) Specifies a single test ID.
test-id-range ( Optional) Specifies a range of test IDs.
all (Optional) Displays the diagnostics for all tests.
detail (Optional) Displays the complete test results.