Specifications

2-524
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show auto qos
show auto qos
To display the automatic quality of service (auto-QoS) configuration that is applied, use the show auto
qos user EXEC command.
show auto qos [interface [interface-id]] [{begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXE C mode
Usage Guidelines The show auto qo s interfa ce interface-id command displays the auto-QoS configuration; it does not
display any user changes to the co nfiguration that migh t be in effect.
To display information a bout the QoS configura tion that might be affected by auto-QoS , use one of these
commands:
• show qos
• show q os map
• show qos in terface in terface-id
• show running- config
Expressions are case sensi tive. For example, if you enter exclude output, the lines that contain output
do not appear, but the lines that contain Output appe ar.
Examples This example s hows outpu t fro m the show au to qos command when auto-QoS is enabled:
Switch# show auto qos
GigabitEthernet1/2
auto qos voip cisco-phone
Switch#
Related Commands
interface interface-id (Optional) Displays auto-QoS information for the specified interface or
for all interfaces. Valid interfaces include physical ports.
begin (Optional) Begins with the line that matches the expression.
exclude (Optional) Excludes lines that match the expression.
include ( Optional) Includes lines that match the specified expression.
expression (Optional) Expression in the out put to use as a reference point.
Command Description
auto qos voip Automatically configures quality of service (auto-QoS) for Voice
over IP (VoIP) within a QoS domain.