Specifications

2-517
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show arp access-list
show arp access -list
To display detailed information on an ARP access list, use the show arp command.
show arp access-list
Syntax Description This command has no arguments or keywords.
Defaults This command has no default settings.
Command Modes EXEC
Examples This example shows how to display the ARP ACL information for a switch:
Switch# show arp access-list
ARP access list rose
permit ip 10.101.1.1 0.0.0.255 mac any
permit ip 20.3.1.0 0.0.0.255 mac any
Related Commands Command Description
access-group mode Specifies the override modes (for example, VACL overrides
PACL) and the non-ove rride mode s (for e xample, merge or st rict
mode).
arp access-list Defines an ARP access list or adds clauses at the end of a
predefined list.
ip arp inspection filter vlan Permits ARPs from hosts that are configured for static IP when
DAI is enabled, defines an ARP access list, and applies the access
list to a VLAN.