Specifications

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
show access-group mode interface
2-513
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
22
show access- group mode int erface
To display the ACL configuration on a Layer 2 interf ace, use the show access-group mode interface
command .
show access-group mode interface [interface interface-number]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Usage Guidelines The valid values for the port number depen d on the chassis used.
Examples This example shows how to display the ACL configura tion on the Fast Ethernet in terface 6/1:
Switch# show access-group mode interface fa6/1
Interface FastEthernet6/1:
Access group mode is: merge
Switch#
Related Commands
interface (Optional) Interface type; valid values are ethernet, fastethernet,
gigabitethernet, tengigabitethernet, and port-channel.
interface-number (Optional) Interface n umber.
Command Description
access-group mode Specifies the override modes (for example, VACL overrides
PACL) and the non-ove rride mode s (for e xample, merge or st rict
mode).