Specifications

2-509
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
shape (class-based queueing)
Switch(config-pmap-c)# shape average 256000
Switch(config-pmap-c)# exit
Switch(config-pmap)# exit
Switch(config)# interface gigabitethernet1/1
Switch(config-if)# service-policy output policy1
Switch(config-if)# end
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command Description
bandwidth Creates a signaling class structure that can be referred to by its
name.
class Specifies the name of the class whose traffic policy you want to
create or change.
dbl Enables active queue management on a transmit queue used by a
class of traffic .
policy-map Creates a policy map that can be attached to multiple ports to
specify a service policy and to enter policy-map configuration
mode.
service-policy (policy-map
class)
Creates a service policy that is a quality of service (QoS) policy
within a policy map.
show policy-map Displays information about the policy map.