Specifications

2-487
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
revision
revision
To set the MST configuration revision number , use the rev isi on command. To return to the default settings,
use the no form of this command.
revision version
no revision
Syntax Description
Defaults Revision version i s set to 0.
Command Modes MST configuratio n mode
Usage Guidelines If two Catalyst 4500 series switche s have the same configuration but have different configura tion
revision numbers, they are consid ered to be part of two different r egions.
Caution Be careful when using the revision command to set the MST configuration revision number beca use a
mistake can put the switch in a different region.
Examples This example shows how to set the configuration revision number:
Switch(config-mst)# revision 5
Switch(config-mst)#
Related Commands
version Configuration revision num ber; valid values are from 0 to 6553 5.
Command Description
instance Maps a VLAN or a set of VLANs to an MST instance.
name Sets the MST region name.
show spanning-tree mst Displays MST pr otocol informat ion.
spanning-tree mst configurati on Enters the MST configuration submode.