Specifications

2-442
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-a gent format -type (global )
pppoe intermediate -agent format-type (glo bal)
To set the access node identifier, generic error message, and identifier string for the switch, use the
pppoe intermediate-agent format-type (global) command. To disable the feature, use the no form of
this command:
pppoe intermediate-agent format-type access-node-identifier string string
pppoe intermediate-agent format-type generic-error-message string string
pppoe intermediate-agent format-type identifier-string string string option {sp|sv|pv|spv}
delimiter {,|.|;|/|#}
no pppoe i nterme diate-a gent fo rmat-t ype {acce ss -no de -i den tifi er | generic-error-message |
identifier-string}
Syntax Description
Defaults a ccess-node-identifier has a default value of 0.0.0.0.
generic-error-message, identifier-string, option, and delimiter have no default values.
Command Modes Global c onfiguratio n mode
Usage Guidelines Use the access-node-identifier and identifier-string commands to enable the switch to generate th e
circuit-id parameters automatically.
The no form of identifier-string command unsets the option and delimiter.
Use the generi c-er ror-m es sage command to set an error message notifying the sender that the
PPPoE Discovery packet was too large.
access-node-identifier
string string
ASCII string literal value for the access-node-identifier.
generic-error-message
string string
ASCII string literal value for the generic-error-message.
identifier-string string
string
ASCII string literal value for the identifier-string.
option {sp|sv|pv|spv} Options:
sp = slot + port
sv = slot + VLAN
pv = port + VLAN
spv
= slot + port + VLAN
delimiter { ,|.|;|/|# } Delimiter between slot/port/VLAN portions of option.