Specifications

2-441
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-agent (interface vlan-range)
pppoe intermedi ate-agent ( interface vlan -range)
Note This command takes effect only if you enable the pppoe i nterme diate -agent g lobal c ommand.
To enable PPPoE Intermediate Agent on an interface VLAN range, use the pppoe intermediate-agent
global command. To disable the feature, us e the no form of this command.
pppoe intermediate-agent
no pppoe intermediate-agent
Syntax Description This command has no arguments or keywords.
Defaults Disabled on all VLANs on all interfaces
Command Modes Interface vlan-r ange configuration mode
Usage Guidelines Although this command takes effect irrespective of the pp poe in terme diate -agen t (i nterfac e
configuration mode) command, yo u must enable the pppoe intermediate-agent (global configuration
mode) command.
Examples This example shows how to enable PPPoE Intermediate Agent on a range of VLANs:
Switch(config-if)# vlan-range 167-368
Switch(config-if-vlan-range)# pppoe intermediate-agent
This example shows how to disable PPPoE Intermediate Agent on a single VLAN:
Switch(config-if)# vlan-range 268
Switch(config-if-vlan-range)# no pppoe intermediate-agent
Related Commands Command Description
pppoe intermediate-agent
(interfa ce)
Enables the PPPoE Intermediate Agent feature on an interface.