Specifications

2-440
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pppoe intermediate-a gent (interfac e)
pppoe intermediate -agent (interface)
Note This command takes effect only if yo u enable the pppoe intermediate-agent global command.
To enable the PPPoE Intermediate Agent feature on an interface, use the pppoe inte rmedia te-ag ent
command. To disable the feature, use the no form of this command.
pppoe intermediate-agent
no pppoe intermediate-agent
Syntax Description This command has no arguments or keywo rds.
Defaults D isabled on all interfaces.
Command Modes Interface configuration mode
Usage Guidelines PPPoE Intermediate Agent is enabled on an interface provided the PPPoE Intermediate Agent is enabled
both on the switch and the interface.
Examples This example shows how to enable the PPPoE Intermediate Agent on an interface:
Switch(config-if)# pppoe intermediate-agent
This example shows how to disable the PPPoE Intermediate Agent on an interface:
Switch(config-if)# no pppoe intermediate-agent
Related Commands Command Description
pppoe intermediate-agent
format -type ( inter face)
Sets circuit ID or remote ID for an interface.
pppoe intermediate-agent
limit rate
Limits the rate of the PPPoE Discovery packets coming on an
interface.
pppoe intermediate-agent
trust
Sets the trust configuration of an interface.
pppoe intermediate-agent
vendor- tag st rip
Enables vendor-tag strip ping on PPPoE Discovery packe ts from
PPPoE Server (or BRAS).