Specifications

2-428
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
power dc input
power dc input
To configure the power DC input pa rameters on t he switc h, use the power dc input command. To return
to the default power settings, use the no form of this command.
power dc input watts
no power dc input
Syntax Description
Defaults D C power input is 2500 W.
Command Modes Global c onfiguratio n mode
Usage Guidelines I f your interface is not capable of supporting Power over Ethernet, you will receive this message:
Power over Ethernet not supported on interface Admin
Examples This example shows how to set the total capacity of the external DC power source to 5000 W:
Switch(config)# power dc input 5000
Switch(config)#
Related Commands
watts Sets the total capacity of the external DC source in watts; valid values are from
300 to 8500.
Command Description
show power Displays information about the power status.