Specifications

2-424
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
port-channel standalone-disable
port-channel st andalone-dis able
To disable the EtherChannel standalone option in a port channel, use the port-channel
standalone-disable command in interface configuration mode. To enable this option, use the no form
of this command.
port-channel standalone-disable
no port-channel standalone-disable
Syntax Description This command has no arguments or keywo rds.
Defaults T he standalone option is disabled.
Command Modes Interface configuration mode
Usage Guidelines T his command can onl y be used when the port channel protocol type is Link Aggre gation Control
Protocol (LACP). It allows you to change the current behav ior when a physical port cannot bundle wit h
an LACP EtherChannel.
Examples The following example shows how to enable t he EtherChannel standa lone option in a port chan nel:
Switch(config-if)# no port-channel standalone-disable
Related Commands Command Description
show etherchannel Displa ys EtherChannel info rmation for a channel .