Specifications

2-402
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
pagp learn-method
pagp learn-meth od
To learn the input in terface of the incomin g packets, use th e pagp learn-method command. To return to
the default value, use the no form of this command.
pagp learn-method {aggregation-port | physical- port}
no pagp learn-method
Syntax Description
Defaults A ggregation port is enabl ed.
Command Modes Interface configuration mode
Examples This example shows how to enable physical port address learning within the bundle:
Switch(config-if)# pagp learn-method physical-port
Switch(config-if)#
This example shows how to enable aggregation port address learning within the bundle:
Switch(config-if)# pagp learn-method aggregation-port
Switch(config-if)#
Related Commands
aggregation-port Specifies learning the address on the port channel.
physical-port Specifies learning the address on the physical port within the bundle.
Command Description
show pagp Displays information about the port channel.