Specifications

2-401
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
nmsp attachment suppress
nmsp attachm ent suppress
To suppress reporting attachment information from a specified interface, use the nmsp attachment
suppress interface command. This command is available only when your switch is r unning the
cryptographic (encrypted) software image. Use the no form of this command to report attachment
informat ion.
nmsp attachment suppress
no nmsp attachment suppress
Syntax Description This command has no arguments or keywords.
Defaults Attachment information is reported.
Command Modes Interface configur ation mode
Usage Guidelines Use the nmsp attachment suppress interface configuration command to configure an interface to not
send attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples This example shows how to configure an interface to not send attachment information to the MSE:
Switch(config)# switch interface gigabitethernet1/2
Switch(config-if)# nmsp attachment suppress
Switch(config-if)#
Related Commands Command Description
nmsp Configures Network Mobility Services Protocol (NMSP) on the
switch.
show nmsp Displays the NMSP information.