Specifications

2-400
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
nmsp
nmsp
To configure Network Mobility Services Protocol (NMSP) on the switch, use the nmsp command. This
command is available only when your swit ch is running the cryptogra phic (encrypted) soft ware image.
Use the no form of this command to return to the default setting.
nmsp {enable | {notification inter val {attac hmen t | location} interval-se conds}}
no nmsp {enable | {notifi catio n inter val {attachment | location} interval-seconds}}
Syntax Description
Defaults N MSP is disabled, NMSP notification interval attachment and NMSP notification interval location
defaults are 30 seconds.
Command Modes Global c onfiguratio n mode
Usage Guidelines U se the nms p glob al configuration command to enable the switch to send encrypted NMSP location and
attachment notifications to a Cisco Mobility Services Engine (MSE).
Examples This example shows how to enable NMSP on a switch and set the location notification time to 10
seconds:
Switch(config)# nmsp enable
Switch(config)# nmsp notification interval location 10
Switch(config)#
Related Commands
enable Enables the NMSP features on the switch.
notifica tion in terval Specifies the NMSP notification interval.
attachment Specifies the attachment notification interval.
location Specifies the location notification interval.
interval-seconds Duration in seconds bef ore a switch sends the locati on or attachment
updates to the MSE. The range is 1 to 30; the defaul t is 30.
Command Description
clear nms p stati stic s Clears the NMSP statistic counters.
nmsp attachment suppress Suppress reporting atta chment information fr om a specified
interface.
show nmsp Displays the NMSP information.