Specifications

2-399
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
name
name
To set the MST region name, use the name command. To return to the default name, use the no form of
this command.
name name
no name name
Syntax Description
Defaults The MST region name is not set.
Command Modes MST configuratio n mode
Usage Guidelines Two or more Catalyst 4500 series switches with the same VLAN mapping and configuration version
number are considered to be in differe nt MST regions if the region na mes are different.
Examples This example shows how to name a region:
Switch(config-mst)# name Cisco
Switch(config-mst)#
Related Commands
name Specifies the name of the MST region. The name can be any string with a maximum
length of 32 characters.
Command Description
instance Maps a VLAN or a set of VLANs to an MST instance.
revision Sets the MST configuration revision number.
show spanning-tree mst Displays MST protoc ol information.
spanning-tree mst
configuration
Enters the MST configuration submode .