Specifications

2-359
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro auto processing
macro auto proc essing
Note Only use this command when Auto SmartPorts (ASP) is enabled globally; when ASP is disabled
globally, interface-level contro l has no effect.
Use the macro auto processin g interface configuration command to enable ASP macros on a specific
interface. Use the no form of this command to disable ASP on a specific interface before ASP is enabled
globally.
macro auto processing [fallback cdp] [fallback lldp]
no macro auto processing [fallb ack cdp] [fallback ll dp]
Syntax Description
Defaults Fallback mechanism is CDP.
Command Modes Interface level configuration
Usage Guidelines The no macro au to proces sing command should be configured on all interfaces where ASP is not
desirable (such as Layer 3 and EtherCha nnel interfaces ) before ASP is enabled global ly.
At the interface level, the default fallback mechanism is CDP. To change the mechanism to LLDP, enter
the no macro auto processing fallback cdp command, followed by the macro auto processing
fallback lldp command.
Examples This example shows how to enable the feature on an interface:
Switch(config)# interface Gi3/1
Switch(config-if)# macro auto processing
Related Commands
fallback cdp Specifies as CDP as the fallback mechanism.
fallback lldp Specifies as LLDP as the fallback mechanism.
Command Description
macro auto ex ecute (built -in
function)
Configures mapping from an event trigger to a built-in macro.
shell trigger Creates a use r defined trigger.
show shell functions D isplays configurations included for all the builtin functions
including user created and built-in functions.
show shell triggers Displays detail for all supported user created and built-in triggers.
macro auto ex ecute (built -in
function)
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.