Specifications

2-354
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
macro auto execute (user-defined function)
exit
fi
if [[ $LINKUP -eq NO ]]; then
conf t
interface $INTERFACE
no macro description $TRIGGER
no switchport access vlan 1
if [[ $AUTH_ENABLED -eq NO ]]; then
no switchport mode access
fi
no switchport port-security
no switchport port-security maximum 1
no switchport port-security violation restrict
no switchport port-security aging time 2
no switchport port-security aging type inactivity
no spanning-tree portfast
no spanning-tree bpduguard enable
exit
fi
}
Switch(config)# end
Related Commands Command Description
macro auto device Simplifies changing the parameters for a built-in functions for a
device type.
macro auto execute (built-in
function)
Changes built-in function default values or to map user-defined
triggers to built-in functions, and to pass the parameter values.
macro auto execute
(remotely-defined trigger)
Maps a trigger to a remotely defined functions.
macro auto global processing Enables Auto Smartports on a switch.
macro auto processing Enables Auto SmartPorts macros on a specific interface.
macro auto sticky Specifies not to remove configurations applied by ASP across link
flaps and device removal.
shell trigger Creates a user defined trigger.