Specifications

2-323
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
logging event trunk-status global (global configuration)
logging event t runk-status global (global configurat ion)
To enable the trunk-status event messaging globally, use the logging event trunk-status global
command . Use th e no form of this command to disable trunk-status event messaging.
logging event trunk-status global
no logging event trunk-status global
Syntax Description This command has no arguments or keywords.
Defaults Global trunk-s tatus messaging is disa bled.
Command Modes Global configura tion mode
Usage Guidelines If trunk-status logg ing event i s not c onfigured at the int erface leve l, the glob al trunk -status setting takes
effect for each interface.
Examples This example shows how to globally enable lin k status messaging on each i nterface:
Switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# logging event trunk-status global
Switch(config)# end
Switch#
Related Commands Command Description
logging event trunk-status global
(global configuration)
Enables the trunk-status event messaging on an interface.