Specifications

2-320
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
logging event link-status global ( global configuration)
logging eve nt link-statu s global (glo bal configurat ion)
To change the default switch-wide global link-status event messaging settings, use the
logging event link-status global command. Use the no form of this command to disable the link-status
event messaging.
logging event link-status global
no logging event link-status global
Syntax Description This command has no arguments or keywo rds.
Defaults T he global link-sta tus messaging is disable d.
Command Modes Global c onfiguratio n mode
Usage Guidelines I f link-status logging event is not configured a t the interface level, this globa l link-status setting takes
effect for each interface.
Examples This example shows how to globally enable link status message on each interface:
Switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# logging event link-status global
Switch(config)# end
Switch#
Related Commands Command Description
logging event link-status (interface
configuration)
Enables the link-status event messaging on an interface.