Specifications

2-319
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738 -01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
lldp tlv-select power-management
lldp tlv-sel ect power-mana gement
To to enable power negotiation through LLDP, use the lldp tlv-select power-management int erfa ce
command .
lldp tlv-select power-management
Syntax Description
Defaults Enabled on POEP por ts
Command Modes Interface level
Command History
Usage Guidelines You need to disable this feature if you do not want to pe rform power negotiation through LLDP.
This feature is not supported on non- POEP ports; the CLI is suppre ssed on such ports and TLV is not
exchanged.
Examples This example shows how to enable LLDP power negotiation on interface Gigabit Ethernet 3/1:
Switch# config t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)# int gi 3/1
Switch(config-if)# lldp tlv-select power-management
Related Commands
This command has no arguments or keyword s.
Release Modification
12.2(54)SG Support was introduced on the C atalyst 4500 series switc h.
Command Description
lldp run Cisco IOS Command Reference lib rary.