Specifications

2-192
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
dot1x port-control
Examples This exampl e shows how to enable 802.1X on Giga bit Ethernet 1/1:
Switch(config)# interface gigabitethernet1/1
Switch(config-if)# dot1x port-control auto
Switch#
You can verify your settings by u sing the show dot1x all or show dot1x inte rface int commands to show
the port-control status. An enabled status indicates that the port-control value is set either to auto or to
force-unauthorized.
Related Commands Command Description
show dot1x D isplays dot1x infor mation.