Specifications

2-181
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
dot1x critical recovery delay
dot1x crit ical recover y delay
To set the time interval between port reinitializations, use the dot1x critical recovery delay command.
To return to the default setting, use the no form of this command.
dot1x critical recovery delay delay-time
no dot1x critical recovery delay
Syntax Description
Defaults Delay time is set to 100 milliseconds.
Command Modes Global configura tion mode
Examples This example shows how to set the 802.1x critical recovery delay time to 500:
Switch(config-if)# dot1x critical recovery delay 500
Switch(config-if)#
Related Commands
delay-time Specifies the interval between port reinitializations when AAA transistion
occurs; valid values are from 1 to 10,000 milliseconds.
Command Description
dot1x critical Enables the 802.1X critical authentication on a port.
dot1x critical eapol Enables sending EAPOL success packets when a port is
critically authorized partway through an EAP exchange.
dot1x critical vlan Assigns a critically authenticated port to a specific VLAN.
show dot1x Displays dot1x information.