Specifications

2-160
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug sw-vlan notifica tion
debug sw-vlan notifi cation
To enable the debugging of the messages that trace the activation and deactivation of the ISL VLAN IDs,
use the debug sw-vlan notification command. To disable the debugging output, use the no form of this
command.
debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange |
modechange | pruningcfgch ange | statechange}
no debug sw-vlan notification {accfwdchange | allowedvlancfgchange | fwdchange | linkchange
| modechange | pruningcfgchan ge | statechange}
Syntax Description
Defaults T his command has no default settings.
Command Modes Privileged EXEC mode
Examples This exampl e shows how to debug the software VL AN interface mode change notifications:
Switch# debug sw-vlan notification modechange
vlan manager port mode change notification debugging is on
Switch#
Related Commands
accfwdchange Enables the VLAN manager notification of aggregated access interface
STP forward changes.
allowedvlancfgchange Enables the VLAN manager notification of changes to allowed VLAN
configuration.
fwdcha ng e Enables the VLAN manager notification of STP forwarding changes.
linkchange Enables the VLAN manager notification of interface link state changes.
modechange Enables the VLAN manager notification of interface mode changes.
pruningcfgchange Enables the VLAN manager notification of changes to pruning
configuration.
statechange Enables the VLAN manager notification of interface state changes.
Command Description
undebug sw-vlan notification (same as
no debug sw-vl an notifi cation)
Disables debugging output.