Specifications

2-145
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug platform packet protocol pagp
debug plat form packet p rotocol pagp
To debug the PAgP protocol packets, use the debug platform pac ket pr otocol p agp co mmand . To
disable the debugging output, use the no form of this command.
debug platform packet protocol pagp [receive | transmit | vlan]
no debug platform packet protocol pagp [receiv e | transmit | vlan]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Examples This example shows how to enable all PM debugging:
Switch# debug platform packet protocol pagp
Switch#
Related Commands
receive (Optional ) Enables the platform pa cket reception debugging f unctions.
transmit (Optional) Enables the platform packet transmission debugging functions.
vlan (Optional) Enables t he platform packet VLAN debugg ing functions.
Command Description
undebug platform packet protocol
pagp (same as no debug platform packet
protocol pagp)
Disables debugging output.