Specifications

2-141
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug nmsp
debug nmsp
To the enable debugging of the Network Mobility Services Protocol (N MSP) on the switch, use th e
debug nmsp command. This command is available only when your switch is running the cryptograp hic
(encrypted) software image. Use the no form of this command to disable debugging.
debug nmsp {all | connection | error | event | packet | rx | tx}
no debug nmsp
Syntax Description This command has no arguments or keywords.
Defaults Debugging is disable d.
Command Modes Privileged EXEC mode
Usage Guidelines The undebug nmsp command is the same as the no debug nmsp command.
Related Commands Command Description
show debugging Displays information about the types of debugging that are enabled.
show nmsp Displays the NMSP information.