Specifications

2-139
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug lacp
debug lacp
To debug the LACP activity, use the debug la cp command. To disable the debugging output, use the no
form of this command.
debug lacp [all | event | fsm | misc | pack et]
no debug lacp
Syntax Description
Defaults Debugging of LACP acti vity is disabled.
Command Modes Privileged EXEC mode
Usage Guidelines This command is supported only by th e supervisor engine and ca n be entered only from the
Catalyst 4500 series switch consol e.
Examples This example shows how to enable the LACP miscellaneous debugging:
Switch# debug lacp
Port Aggregation Protocol Miscellaneous debugging is on
Switch#
Related Commands
all (Optional) Enables all LACP debugging.
event (Optional) Enables the debugging of the LACP events.
fsm (Optional) Enables the debugging of the LACP finite state machine.
misc (Optional) Enables the miscellaneous LACP debugging.
packet (Optional) Enables the LACP packet debugging.
Command Description
undebug pagp (same as no debug pagp) Disables debugging output.