Specifications

2-136
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ip dhcp snooping event
debug ip dhcp snooping even t
To debug the DHCP snooping events, use the debug ip dhcp sn ooping event command. To disable
debugging output, use the no form of this command.
debug ip dhcp snooping event
no debug ip dhcp snooping event
Syntax Description This command has no arguments or keywo rds.
Defaults D ebugging of snoopi ng eve nt is di sabled.
Command Modes Privileged EXEC mode
Examples This exampl e shows how to enable the debuggi ng for the DHCP snooping event s:
Switch# debug ip dhcp snooping event
Switch#
This example shows how to disable th e debugging for the DHCP snoopi ng events:
Switch# no debug ip dhcp snooping event
Switch#
Related Commands Command Description
debug ip dhcp snooping
packet
Debugs the DHCP snooping messages.