Specifications

2-135
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
debug ipc
debug ipc
To debug the IPC activity, use the debug ipc command. To disable the debugging output, use the no form
of this command.
debug ipc {all | errors | events | headers | packets | ports | seats}
no debug ipc {all | errors | events | headers | packet s | po rt s | seat s}
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Examples This example shows how to enable the debugging of the IPC events:
Switch# debug ipc events
Special Events debugging is on
Switch#
Related Commands
all Enables all I PC debug ging.
errors Enables the IPC error debugging.
events Enables the IPC event debugging.
headers Enables the IPC header debugging.
packets Enables the IPC packet debugging.
ports Enables the debugging of the cre ation and deletion of ports.
seats Enables the debugging of the creation and deletion of nodes.
Command Description
undebug ipc (same as no debug
ipc)
Disables debugging output.