Specifications

2-117
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear vlan counters
clear vlan counte rs
To clear the software-cached counter values to start from zero again for a specified VLAN or all existing
VLANs, use the clear vlan counters command.
clear vlan [vlan-id] co unt ers
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC mode
Usage Guidelines If you do not specify a vlan-id value; the software-cached counter values for all the existing VLANs are
cleared.
Examples This example shows how to clear the software-ca ched counter values for a specific VLAN:
Switch# clear vlan 10 counters
Clear "show vlan" counters on this vlan [confirm] y
Switch#
Related Commands
vlan-id (Optional) VLAN number; see the “Usage Guidelines” section for valid values.
Command Description
show vlan counters Displays VLAN counter information.