Specifications

2-92
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
clear interface gigabitethernet
clear interface gigabitethe rnet
To clear the hardware logic from a Gigabit Ethernet IEEE 802.3z interface, use the clear interf ace
gigabitethernet command.
Note This command does not increment interface resets as displayed with the show inte rface
gigabitethernet mod/port command.
clear interface gigabitethernet mod/port
Syntax Description
Defaults T his command has no default settings.
Command Modes Privileged EXEC mode
Examples This exampl e shows how to clear the hardwar e logic from a Gigabit Ether net IEEE 802.3z interface :
Switch# clear interface gigabitethernet 1/1
Switch#
Related Commands
mod/port Number of the module and port.
Command Description
show interfaces status Displays the interface status.