Specifications

2-83
Catalyst 4500 Se ries S wit ch C is co IO S C om mand R efer ence —Re lease I OS XE 3 .3.0 XO(1 5.1 (1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
cisp enable
cisp enable
Use the cisp enable global configuration command to enable Client Information Signalling Protocol
(CISP) on a switch.
cisp enable
no cisp enable
Syntax Description
Defaults None
Command Modes Global configuration
Usage Guidelines You must enable the CISP protoc ol (with the global cisp enable command) on both the authenticator and
supplicant switch. The CISP protocol is crucial because it conveys the client information from the
supplicant switch to the authenticator switch thereby providing access for the clients of the supplicant
switch through the authentica tor switch.
Examples This example shows how to enable CISP:
switch(config)# cisp enable
Related Commands
cisp ena ble Enable CISP.
Command Description
dot1x credentials (global
configuration)
Configures a profile on a supplica nt swit ch.
show cisp (IOS command) Displays CISP information for a specified interface.