Specifications

2-80
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
channel-group
Caution Do not enable Layer 3 addresses on the physical EtherChannel interfac es. Do not assign bridge groups
on the physical EtherChanne l interfaces because it creates loops.
Examples This exampl e shows how to add Gigabit Ethern et interface 1/1 to the Ethe rChannel group that is
specified by port-channel 45:
Switch(config-if)# channel-group 45 mode on
Creating a port-channel interface Port-channel45
Switch(config-if)#
Related Commands Command Description
interface port-channel Accesses or creates a port-channel interface.
show interfaces port-channel
(refer to Cisco IOS
documentation)
Displays the information about the Fast EtherChannel.