Specifications

2-78
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0XO(15.1(1)XO)
OL_28738-01
Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches
call-home test
call-home test
To manually send a Call Home test message, use the call-home tes t command in privileged EXEC mode.
call-home test [“test-message”] profile profile-name
Syntax Description
Command Default This command has no default settings.
Command Modes Privileged EXEC mode
Usage Guidelines T his command sends a test message to the specified destination profile. If you enter test message text,
you must enclose the text in quotes (“”) if it contains spaces. If you do not enter a message, a default
message is sent.
Examples This example shows how to manually send a Call Home test message:
Switch# call-home test “test of the day” profile Ciscotac1
Related Commands
“test-message” (Optio nal) Test message text.
profile profile-name Specifies the name of the destination profile.
call-home (global
configuration)
Enters call home configuration mode.
call-home send
alert-group
Sends a specific alert group message.
service call-home (refer to
Cisco IOS documentation)
Enables or disables Call Home.
show call-home Displays call-home configuration information.