Datasheet

© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 8
Required Accessories
Part Number
Plug-in at output: 1 required, choose from the following options:
●
1 link 0 dB at output
●
1 splitter 3.5/3.5 dB at output
●
1 splitter 2/6 dB at output
●
1 splitter 1/10.5 dB at output
●
1 splitter 0.6/14 dB at output
A74069.10
A77041.10
A77042.10
A77043.10
A77044.10
Plug-in reverse transmitter
●
1 required for reverse transmission
A9008x.10yyyy
Optical adapter: up to 2 adapters are required; 1 for forward and 1 for reverse.
Internal optical connector is SC/APC, choose from the following options:
●
Adapter SC/APC to E2108
●
Adapter SC/APC to FC/APC
●
Adapter SC/APC to SC/APC
A90540.1048
A90540.1068
A90540.1088
The optional accessories listed in Table 6 must be ordered separately:
Table 6. Optional Accessories
Optional Accessories
Part Number
Voltage lock-out module, 24 or 35V
A75018.00xx
Plug-in Compact EuroDOCSIS/DOCSIS Transponder
4038498
Handheld terminal (required for configuration of the unit)
A91200.11
Configuration kit (software and USB-cable)
A91220.10
Single reverse filter:
●
1 Single low pass filter 65 MHz
●
1 Single band pass filter 15/65 MHz
●
1 Single high pass filter 11/15 MHz
●
1 Single low pass filter 85 MHz
●
1 Single band pass filter 15/85 MHz
A75127.1065
A75127.101565
A75127.101115
A75127.1085
A75127.101585
For More Information
http://www.cisco.com
Printed in USA C78-730311-00 11/13