Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 14
Type
Standards
Network Equipment
Building Standards (NEBS)
2
This product is designed to meet the following requirements
●
GR-63-CORE
●
GR-1089-CORE
●
GR-3108-CORE
ETSI/EN
●
EN 300 386 Telecommunications Network Equipment (EMC)
●
EN55022 Information Technology Equipment (Emissions)
●
EN55024 Information Technology Equipment (Immunity)
●
EN61000-6-1 Generic Immunity Standard
Network synchronization
●
GR-1244-CORE
●
ITU-T G.813
●
ITU-T G.703 clause 5
●
ITU-T G.703 clause 9
●
ITU-T G.8261/Y.1361
●
ITU-T G.781
●
ITU-T G.8264
●
IEEE1588-2008
E1
●
AS/ACIF S016: 2001
●
ITU.G.703: 1998
●
ITU I.431: 1993
●
TBR13: 1996
●
TBR12:1996: A1 1996
●
RRA No. 2009-38
●
ITU G.704
T1
●
IC CS-03: 2004
●
DSPR Technical Condition 2004
●
TIA-968B
●
ID0002: 2007
●
HKTA 2028: Edition 2010
Ethernet:
1000Base-T
100Base-T
100Base-FX
1000Base-S
1000BaseL
1000Base-Z
1000Base-E
1000Base-BX-U
1000Base-BX-D
DWDM-SFP-GE:
CWDM-SFP-GE:
10000Base-S
10000Base-L
10000Base-Z
10000Base-E
DSPR Technical Requirement 2005
●
IEEE 802.3
●
IEEE 802.3ae
DSPR Technical Condition 2004
●
IEEE-802.3ah
●
ANSI X3.263-1995
●
ISO/IEC 9314-3
1
The TDM ports (A901-12C-FT-D, A901-4C-FT-D, A901-6CZ-FT-D, and A901-6CZ-FT-A) and BITS ports require the use of
shielded twisted pair cabling (STP) for EMC emissions.
2
The copper Ethernet ports require the use of STP cabling for NEBS EMC compliance. The TDM ports (A901-12C-FT-D,
A901-4C-FT-D, A901-6CZ-FT-D, and A901-6CZ-FT-A) and BITS ports are Type-2 and Type-4 NEBS compliant.
Warranty Information
Warranty information is available on Cisco.com at the Product Warranties page.