User manual

If you fail to retrieve or answer the call within a specified amount of time, the call is
redirected to another destination (set up by your system administrator), such as
voicemail. If the call gets redirected, it can no longer be retrieved by using Call Park.
Park Call Using Assisted Directed Call Park
ParkCallUsingAssistedDirectedCallPark
Procedure
 Step1 During a call, press Directed Call Park displaying an idle Line Status
indicator.
 Step2 Retrieve the call from any other Cisco Unified IP Phone in your
network as follows:
a) Enter the park retrieval prefix.
b) Dial the Directed Call number.
Example:
If the park retrieval prefix is “99” and the Directed Call number is “1234,” enter
991234.
Step3 If you do not retrieve the call within a certain amount of time (set by your
system administrator) you receive an alert tone, at which time you can:
• Press Resume to resume the call on your phone.
• Retrieve the call from another phone.
If you fail to retrieve or resume the call within a specified amount of time, the call is
directed to another destination (set up by your system administrator), such as
voicemail. If the call gets redirected, it can no longer be retrieved by using Call Park.
ParkCallUsingManualDirectedCallPark
Procedure
Step 1
 Step2 Enter the Directed Call number where you will park the call.
 Step3 Press Transfer again to finish parking the call, then hang up.
 Step4 Retrieve the call from any other Cisco Unified IP Phone in your
network as follows:
a) Enter the park retrieval prefix.
b) Dial the Directed Call number.
Example:
If the park retrieval prefix is “99” and the Directed Call number is “1234,” enter
991234.
During
a
call
press
Transfer