User manual

•
A Forward Allicon in the line label.
• The forwarding information in the header.
 Step4 To cancel call forwarding, press Forward Off.
Call Park
Call Park allows you to use your phone to park (temporarily store) a call, which you
can then retrieve from another phone (such as a phone at a coworker’s desk or in a
conference room).
There are two ways you can park a call:
Park
Allows you to park an active call that you answered on your phone, and retrieve it
using another phone in the Cisco Unified Communications Manager system.
Directed Call Park
Allows you to park and retrieve an active call in two different ways:
• Assisted Directed Call Park: Allows you to park an active
call using a feature button, which your system
administrator sets up as a speed-dial line.
With this type of directed call, you can monitor the status of the line (in-use, idle, or
Do Not Disturb) using Line Status indicators.
• Manual Directed Call Park: Allows you to park an active
call by transferring it to a Directed Call number, which
your system administrator sets up.
You retrieve the call at another phone by dialing a park retrieval prefix number
(provided by your system administrator) and then dialing the Directed Call number
you used to park the call.
Your system administrator sets up either the Directed Call Park or the Park feature
on your phone, but not both.
ParkandRetrieveCallUsingPark
Procedure
 Step1 During a call, press Park, then hang up.
Your phone displays the number where the system parked the call. The parked call is
put on hold, and you can press Resume to resume the call on your phone.
Step2From any other Cisco Unified IP Phone in your network, enter the number
where the call is parked to retrieve the call.
Step3 If you do not retrieve the call within a certain amount of time (set by your
system administrator) you receive an alert tone, at which time you can:
• Press Answer to answer the call on your phone.
• Retrieve the call from another phone.