User manual

HideorShowVideo
Your system administrator sets up the default softkey (either Show Video or Hide
Video) and the default view (video hidden or video displayed).
Procedure
 Step1 To hide the video, press Hide Video.
 Step2 To show the video, press Show Video.
HideSoftkeysinFull‐ScreenVideoMode
The softkeys display on the screen when a full-screen video call is enabled. If there
is no user activity, the softkeys automatically hide after 10 seconds.
To display the softkeys, do one of the following actions:
• Press Mute.
• Change the state of the video such as by plugging in the
camera.
• Touch the phone screen (Cisco Unified IP Phone 9971 only).
• Press any softkey (Cisco Unified IP Phone 9951 only).
Enable Full Screen Video
EnableFullScreenVideo
Procedure
 Step1 Press Full Screen.
 Step2 Press Minimize to return to the original view.
MuteVideo
Procedure
 Step1 Press Mute Video.
 Step2 Press Unmute Video to unmute the video.
SwapViews
Procedure
Press Swap to toggle between the full-screen view and the picture-in-picture (PIP)
view.
The Swap is only available if you are in full-screen view.