User manual

CloseCameraLensShutter
The following figure shows the location of the camera lens shutter.
Procedure
 Step1 To close the shutter, rotate the lens clockwise.
 Step2 To open the shutter, rotate the lens counterclockwise.
CiscoUnifiedVideoCameraInstallation
The Cisco Unified Video Camera can be mounted on your Cisco Unified IP Phone
9951 or 9971, or it can be mounted on your computer monitor. If you need help
installing or positioning your camera, contact your system administrator.
Use one of these procedures to mount the camera:
MountCameraonPhone
Procedure
 Step1 Remove the protective plastic from the camera lens and body.
 Step2 On the phone, remove the small plastic cover located on the topside
of the phone display.
Step3With your phone idle (no calls), slide the camera USB connector (on the
bottom of the camera) into the Phone USB port (on the back of the phone display).
As you do this, pins on the underside of the camera fit into pinholes on the top of the
phone display to further stabilize the camera.
Cisco Unified Video Camera Installation