User manual

Navigate to a submenu.
(A right arrow (>) next to
the menu item indicates
that a submenu exists.)
Highlight the menu item
and press the item number
on the keypad.
Or press the down arrow on
the Navigation pad and
then press the Select
button.
Highlight the Network Setup
menu, then press 1 to open
the submenu.
Select a line to use a calling
feature (when the line is
idle).
Press the line button.
Indicators of your line
selection include:
• The selected line is
displayed on the phone
screen header.
• Color of the icon (on
the line label) changes
to blue.
Press the line button and
then press Forward All to
forward calls on that line.
Select a line to use a calling
feature (when the line has
one or more active calls).
Press the line button.
Indicators of your line
selection include:
• The selected line is
displayed on the phone
screen header.
Color of the icon (on the
line label) changes to blue.
Press the line button twice
and then press
Forward All to forward
calls on that line.
Power Save and Power Save Plus
There are two levels of energy-saving modes that your system administrator can set
up:
 Power Save—The phone display goes blank when not in use for a period of
time, reducing the power requirements.
 Power Save Plus—The phone display goes blank, turning the phone off and
on at predetermined times. The power to the phone is significantly reduced.
Power Save
Depending on how your system administrator set up your phone, the phone display
may go into a power-save mode (the phone screen appears blank and the Select
button is lit white).
To turn on the phone display, press any button, touch the blank phone screen, or
pick up the handset.
Power Save Plus
Your Cisco Unified IP Phone supports the Cisco EnergyWise (EW) program, also
known as Power Save Plus. Your system administrator sets up sleep (power down)
and wake (power up) times for your phone to save energy.
Ten minutes before the scheduled sleep time, the Select button flashes and you
receive a message that your phone will power off at a specific time. If enabled by