Specifications

EFT Draft - CISCO CONFIDENTIAL
3-9
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)
OL-20861-01
Chapter 3 Setting Up the Cisco Unified IP Phone
Understanding the Cisco Unified IP Phone Components
• Release and Accept
Handsfree devices may differ in how features are activated. Device manufacturers may also use different
terms when referring to the same feature.
For more information, see the manufacturer’s documentation.
Adding a Bluetooth Wireless Headset to the Phone
The Cisco Unified IP Phones 9951 and 9971 support Bluetooth wireless headsets.
You can enable your bluetooth wireless headset by following these steps:
Procedure
Step 1 In Cisco Unified Communications Manager administration, choose Device > Phone, locate the phone
you want to modify, and go to the Phone Configuration window for that phone.
Step 2 In the Phone Configuration window, select Enable for the Bluetooth setting and Handsfree for the
Bluetooth Profiles settings.
Step 3 Save your changes.
After the bluetooth wireless headset is enabled through Cisco Unified Communications Manager
Administration, you must add the headset as an accessory to the phone by using following these steps:
Procedure
Step 1 On the Cisco Unified IP Phones 9951 or 9971, press the Applications button and select
Accessories.
Step 2 Select Add Bluetooth Accessory.
The Adding Bluetooth Accessory window appears. A message tells you to make sure your accessory is
“discoverable,” which means that the Bluetooth should be powered on and in “discoverable” or “pairing”
mode.
Once the Bluetooth device is located, its name will appear in the window, and a message appears that
asks for a PIN so that the Bluetooth device can be paired with the Cisco Unified IP Phone.
Step 3 The Cisco Unified IP Phone automatically tries to pair with the headset by using a PIN of “0000.” If the
headset uses a different PIN, enter the correct PIN by referring to the user guide that came with the
headset.
Note It is recommended that users read the headset user guide for more information about pairing and
connecting the headsets.
Once the phone has the correct pin, the phone will try to connect to the accessory. The phone will provide
feedback to the user while it is trying to connect the accessory. If unable to connect, an error alert will
be shown to let the user know the reason for the failure. There will be a timeout of 10 seconds for the
phone to try to connect the accessory. If the timer expires without a successful connection, an error alert
will be displayed.