User's Guide

Your Phone
Replace Your Existing Phone with a New Phone
Cisco IP Conference Phone 8832 User Guide
13
Figure 9: Smart Adapter LAN Port Connected to the LAN Port on the Wall Outlet
Step 4 Connect the first phone to the Smart Adapter using the longer, thicker USB-C cable.
Step 5 Connect the second phone to the Smart Adapter using a USB-C cable.
The following figure shows installation of the conference phone in daisy chain mode.
Figure 10: Conference Phone Installation in Daisy Chain Mode
Replace Your Existing Phone with a New Phone
You can change your phone model. The change can be required for a number of reasons, for example:
• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version
that doesn't support the phone model.
• You wants a different phone model from their current model.
• Your phone requires repair or replacement.
Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have
the extra lines or line buttons configured.
The phone reboots when the configuration is complete.