Datasheet

© 2014 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 24
Table 12. Wireless LAN and 3G Specifications
SRST Specifications
SRST specifications
●
Packet fax and voice DSP module PVDM2-16
FXS voice-port specifications:
●
Tip and ring interfaces for each FXS port (subscriber line interface card [SLIC])
●
Ring voltage
●
Ring frequency
●
Ring waveform
●
Ring load
●
Ringer Equivalence Number (REN)
●
Loop resistance
●
On- and off-hook characteristics
●
On-hook voltage (tip and ring)
●
Off-hook current
●
RJ-11 FXS port terminating impedance option
BRI voice-port specifications:
●
Interface type
●
Compliance
●
Safety conformance
●
ITU compliance
●
Interface
●
ISDN digital access
●
Physical connector
●
Phantom power
Wireless Specifications
Radio frequency band
●
2.4 GHz
Data rates supported
●
802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
●
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
●
802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, and m0-m15
Maximum transmit power (2-channel
aggregate)
Note: Maximum power setting is subject to changes by channel and by region, depending on
regulations.
●
802.11b 20 dBm
●
802.11g 17 dBm
●
802.11n 16 dBm
3G specifications
Data rates
●
CDMA: 850 and 1900 MHz
●
HSDPA: 850, 900, 1900, and 2100 MHz