Specifications

Application Views Stratacom ATM Application
Device Management Page 94 Cisco Stratacom BPX8600 and IGX8400
Loopback State
Specifies the current loopback state of the
endpoint.
Test Type
Specifies the type of test the user would like to
conduct on this endpoint.
Round Trip Delay
The value of this field is the calculated round trip
delay (measured in milliseconds) for an OAM cell
that is sent across the network to the remote node
where it is looped back and returned to this node.
Other BCM
The value of this field is equivalent to ATM
Endpoint BCM.
Other FGCRA
The value of this field is equivalent to ATM
Endpoint FGCRA.
Group Description
Describes the group this endpoint is associated
with.
Local-Remote Lpbk State
Specifies the Local-Remote Loopback State set for
the endpoint.
NRM
The maximum number of cells a source may send
for each forward RM-cell. The following
configurations apply:
• Units: cells
• Applicable connection types: ABRSTD only
• Default: 32
• Dependency: VSVD = enable (1)
• Applicable cards: BXM only
FRTT
The Fixed Round-Trip Time (FRTT) is the sum of
the fixed and propagation delays from the source
to a destination and back. The following
configurations apply:
• Units: milliseconds
• Applicable connection types: ABRSTD only
• Default: 0
• Dependency: VSVD = enable (1)
• Applicable cards: BXM only
TBE
The Transient Buffer Exposure (TBE) is the
negotiated number of cells that the network
would like to limit the source to sending during
startup periods, before the first RM-cell returns.
The following configurations apply:
• Units: cells