Specifications

Application Views Stratacom ATM Application
Device Management Page 91 Cisco Stratacom BPX8600 and IGX8400
• Applicable connection types: ATFR (1-107
cells), ATFST
• Default: 1
ATM Endpoint Table 2
Index
The index into the table for this endpoint.
Although only 5000 endpoints may exist on a
node, 10000 possible index values exist to
support DAX (intra-node) connections.
Other CCDV
The Compliant Cell Delay Variation, also known
as CDVT (0+1,) Cell Delay Variation Tolerance,
which specifies the maximum time period for
accumulated violations of cell-arrival time
parameters. This field applies to the First Leaky
bucket for cells with Cell Loss Priority of “0” or
“1.” The following configurations apply:
• Units: microseconds
• Applicable connection types: UBR, CBR, VBR,
ATFR, ABRSTD, ABRFST, ATFST
• Default:
- CBR: 10000
• Others: 250000
• Dependency: This object is not allowed for
BPX->IPX AFT/AFTST connections.
Other CLP High
The other Cell Loss Priority (CLP) tagging
activation threshold. The following configurations
apply:
• Units: % of VCQ Size
• Applicable connections: ABRSTD, ABRFST,
ATFST
• Default: 80%
• Dependency: VSVD = enable(1)
• Applicable cards: BXM, ASI-T3/E3
Other CLP Low
The other end Cell Loss Priority (CLP) tagging
deactivation threshold. The following
configurations apply:
• Units: % of VCQ Size
• Applicable connections: ABRSTD, ABRFST,
ATFST
• Default: 35%
• Dependency: VSVD = enable (1)
• Applicable cards: BXM, ASI-T3/E3
CLP Tagging
The Cell Loss Priority (CLP) tagging for handling
non-compliant cells. When enabled the CLP bit is
set on non-compliant cells. When disabled non-
compliant cells are discarded. The following
configurations apply: