Specifications

Device Management Page 9 Cisco Stratacom BPX8600 and IGX8400
Interface Icons
Figure 4 shows a close-up of an Interface icon
from the Device view. Most of the informational
labels on the icon also provide double-click access
to other views, as explained in the following label
descriptions.
Figure 4: Interface Icon
Interface Number Label
This label displays the interface (port) number.
IF Status Label
This label displays the current status of the
interface for the primary application selected,
e.g., Gen Rtr App or MIB-II App. Table 2 lists the
possible label color representations. Note that the
color of the label also depends on the interface’s
current Administrative Status, which you set in
the Interface Configuration view. This view can be
accessed by double-clicking the Interface Type
label.
Interface Type Label
This label identifies the interface media type
(Ethernet, ATM, etc.). Double-click this label to
access the Interface Configuration view. See the
SPECTRUM Views documentation.
c
f
b
1
ethernet
0:0:1D:F:FD:B6
a
a Interface Number Label
b IF Status Label
c Interface Type Label
d Network Type Label
e Physical Address Label
f IP Address Label
fxp0
0.0.0.0
d
e
ON
Table 2: Interface Status Label Colors
Color
Operational
Status
Administrative
Status
Label
Text
GreenupupON
Blue down down OFF
Yellow down up OFF
Red testing testing TEST