Specifications

Application Views Stratacom ATM Application
Device Management Page 86 Cisco Stratacom BPX8600 and IGX8400
Other Index
The index into the remote node’s ATM Endpoint
table for this endpoint. For DAX (intra-node)
connections, this index is associated with the
local node and will be in the range of 5000 to
9999.
Other Description
Describes the remote PVC endpoint. Contains
information about the domain, nodename, slot,
port, VPI, and VCI for the endpoint.
Admin Status
The user requested state for endpoint table row. A
user can create this VC or delete this VC by
setting this object appropriately. If the endpoint is
to be modified, set this object identifier to modify.
Oper Status
The actual state of the endpoint. If the state is
failed, check the fields No Route Found, Bump
Failure, and Test Failure to determine reason for
failure.
No Route Found
The endpoint failed because no route to the
remote endpoint can be found.
Bump Failure
The endpoint failed because of insufficient
bandwidth to route to the remote endpoint. This
may have also been caused because a higher
priority connection took this endpoint’s
bandwidth. A higher priority connection is one
with the lowest Class Of Service (COS).
End Point Fail
The endpoint failed because of a remote endpoint
failure. The remote endpoint is on a node that
resides in another domain making the connection
an inter-domain connection.
Test Failure
The endpoint failed because of the failure of a
connection test.
Connection Ptr
The general connection information pointer.
Using this pointer the user can obtain connection
status and routing information. This is an object
identifier specifying the first column of the
appropriate row in the Connection Table.
Next Pointer
The next endpointer information pointer. This
allows logical sets of endpoints to be linked up;
for example, the endpoints associated with a
bundle or group. This is an object identifier
specifying the first column of the appropriate row
in the ATM Endpoint Table.
Next Endpt Ptr
The next endpoint information pointer for the port
associated with this endpoint; for example, using