Specifications

Application Views Stratacom ATM Application
Device Management Page 84 Cisco Stratacom BPX8600 and IGX8400
relative to those for which the PCR is defined.
Enforcement of this bound by the UPC could
allow the network to allocate sufficient resources,
but less than those based on the PCR, and still
ensure that the performance objectives (e.g., Cell
Loss Ration) can be achieved.
MCR
Minimum Cell Rate (MCR) specifies the rate at
which the source is always allowed to send.
Other End-Port Table
Index
The index into the From Other End-Port Table.
VC Queue
The value of this field is the maximum queue
depth (in cells) for the other endpoint.
EFCI Queue
The threshold setting used by the explicit
congestion notification feature for the other
endpoint’s transmit queue.
QIR
The transmit Quiescent Information Rate (QIR)
parameter (in cells bits per second) for the other
endpoint. This value can range between the MIR
and PIR values and must be between “0” and
“96000.” This parameter has meaning only for
ForeSight connections. This field corresponds to
the Initial Cell Rate (ICR.)
% Utilization
The value of this object is equal to the channel
percentage utilization setting for the other
endpoint. This is the expected long-term
utilization of the channel by the other endpoint.
CBS
The value of this object is equal to the Compliant
Burst Size (CBS) in cells for the other endpoint.
This field corresponds to the Maximum Burst Size
(MBS) defined by ATM standard documents.
IBS
The value of this field is equal to the Initial Burst
Size (IBS) in cells for the other endpoint.
CCDV
The value of this field is equal to the Compliant
Dell Delay Variation (CCDV) for the other
endpoint.
CLP High
The value of this field is equal to the Cell Loss
Priority (CLP) tagging activation threshold for the
other endpoint.